DALI LED-driver, justerbar effekt (20-42W - 600-1050mA)

Art.nr: XSI-45W1050-A8DA0F

Antall:

DALI LED DT6 multiwatt driver er ideell for bruk med våre LED-paneler, og den er designet for å sikre optimal ytelse og kompatibilitet.
Med justerbare wattstyrker og spesifikke strøm- og spenningsnivåer kan denne driveren tilpasses for å matche spesifikasjonene til våre LED-paneler.
Kabel plugg til LED panel medfølger.

Effekt
42W - 1050mA (standard)
38W - 950mA
36W - 900mA
34W - 850mA
32W - 800mA
30W - 750mA
28W - 700mA
24W - 600mA

Input
Input Power - 24-45W
Input Voltage - 180-265V
Rated Input Voltage(V) - 200-240V
Frequency - 50/60HZ
Input Current - ≤0.28A
Rated Input Current - ≤0.25A
Power Factor (typ) - 0.9
Total Harmonic Distortion(THD) - <20% @230V
Efficiency (typ) - ≥88%
Inrush Current (Typ.) - 16A/214uS
Max Circuit Breaker - Please refer to" Circuit breaker Specification"
Leakage Current - <0.5mA/240V
No Load Wattage - <0.5W @230V

Output
Output Voltage Range - 30-40V
Rated Output Current - 600-1050mA
Line Regulation - ±5%
Open Circuit Voltage (max) - 50V
Setup time(note1) - <1S @230V
Flickering Index(IEEEStd1789) - 6%(NO RISK)

Protection
Short Circuit Protection - Constant current limiting, recovers automatically after fault condition is removed
Over Voltage Protection - Shut down o/p voltage
Over Temperature Protection - Shut down o/p voltage, recovers automatically after temperature goes down

Safety&EMC
Safety Standards - IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510.14,GB19510.1 approved
Withstand Voltage - I/P-O/P:3.75KVac,<5mA 60S; I/P-FG:1.6KVac,<5mA 60S; O/P-FG:0.5KVac,<5mA 60S
Isolation Resistance - I/P-O/P: 500VDC, ≥100M Ω
Surge - IEC/EN61000-4-5(L-N:1KV, )
EMC Emission - IEC/EN55015, IEC/EN61000-3-2
EMC Immunity - IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547

Other
Dimension(L*W*H) - 144.0*80.0*32.0mm
Weight - 0.20Kg